Home › Brands › Compare Models

Compare Models

2024 SCAG Power Equipment Cheetah II 72 in. Kawasaki FX Series EFI 38 hp in Mount Bethel, Pennsylvania — 2024 SCAG Power Equipment Cheetah II 72 in. Kawasaki FX Series EFI 38 hp

View Details

Specs
Features

General Information

Manufacturer

SCAG Power Equipment

Model Year

2024

Model

Cheetah II 72 in. Kawasaki FX Series EFI 38 hp

Model Code

SCZII-72V-38FX-EFI

Color

Orange

Body

Seat

4-point iso-mounted mid-back mounted on operator-suspension platform

Drivetrain

Drive System

Hydro-Gear ZT5400 Transaxle. Two-Speed

Travel Speed Forward

High-speed - 16 mph

Low-speed - 12 mph

High-speed - 16 mph

Low-speed - 12 mph

Travel Speed Reverse

High-speed - 8 mph

Low-speed - 5 mph

High-speed - 8 mph

Low-speed - 5 mph

Wheel Motors

Internal Motor - 21 cc

Drive Tires

24 x 12-12 in.

Steering Tires

Caster - 13 x 6.5-6 in.

Parking Brake

Foot-operated pedal

Engine

Engine Make

Kawasaki®

Engine Model

FX Series EFI

Horsepower

38 hp

Fuel System

Electronic fuel injection

Fuel Capacity

Total - 13 gal.

Hydraulics

Pump Type

Internal Pump - 16 cc

Measurements

Length

91 - 97.5 in.

Width

Chute down - 83 in.

Chute in transport position - 73 in.

Chute down - 83 in.

Chute in transport position - 73 in.

Height

ROPS folded - 49.5 in.

ROPS up - 67 in.

ROPS folded - 49.5 in.

ROPS up - 67 in.

Weight

1,399 - 1,427 lb.

Cutting Width

72 in.

Cutting Height

1.25 to 5 in. in 0.25 in. increments

Operational

Deck Construction

Tri-plate cutter deck constructed of 3 steel plates totaling nearly 1/2 in. of steel. Reinforcement plates at cutter deck spindles

Deck Type

Velocity Plus™

Deck Lift

Adjustable foot-operated pedal

Spindles

Cast-iron housing with tapered roller bearings

Blade Brake Clutch

Ogura GT5 (350 ft. lb.) Adjustable air-gap for extended life

Other

Warranty

2-Year Commercial Machine

3-Year or 500 hr. Non-Commercial Machine

3-Year Cutter Deck

3-Year Cutter Deck Spindle

90-Day Wear Item & Rental Use

Engine

2-Year Commercial Machine

3-Year or 500 hr. Non-Commercial Machine

3-Year Cutter Deck

3-Year Cutter Deck Spindle

90-Day Wear Item & Rental Use

Engine

Features

THE ENVY OF THE NEIGHBORHOOD - 72" CUTTING WIDTH: The envy of the industry, Velocity Plus™ decks deliver an amazing quality-of-cut and a wide, even discharge. This deck is equipped with Scag’s ultra-tough cast-iron spindles featuring tapered roller bearings and a top-mounted grease fitting with a relief valve to prevent over-greasing.
OGURA PTO CLUTCH BRAKE - STRONG, ADJUSTABLE CLUTCH FOR LONG LIFE: The Ogura GT5 PTO Clutch Brake provides excellent starting and stopping power for the cutter deck, 350 ft. lb. of holding strength, and an adjustable air gap for long life.
HEAVY-DUTY, DOUBLE-TUBE STEEL MAIN FRAME - SOLID DESIGN FOR YEARS OF DEPENDABLE SERVICE: The Cheetah™ is ultra-strong and built for long life. It has a wide mower stance and extra-low center of gravity for ultimate stability and a replaceable front caster-wheel weldment.
HYDRO-GEAR ZT-5400 TRANSAXLES - SPEEDS UP TO 16 MPH!: Two-speed ZT-5400 transaxle lets you choose either Low Range to travel up to 12 mph or High Range for up to 16 mph. Internal 16 cc pumps and 21 cc motors help provide speed, power and torque. The transaxle’s design greatly reduces hoses and possible leak points.
EASE OF MAINTENANCE - MORE UPTIME: Flip-up components, easy-to-reach grease Zerks and many more features make servicing the Cheetah™ simple, so you can be in the shop less and on the job more.
CHEETAH II OPERATOR SUSPENSION SYSTEM - UNPARALLELED COMFORT: With five settings from soft to firm, the Operator Suspension System isolates the operator from the effects of rough terrain, providing unmatched comfort without sacrificing quality-of-cut. A coil-over shock provides effective suspension action right where it’s needed, and only where it’s needed. The seat’s 4-point, rubber iso-mounting provides even more shock absorption, maximizing your comfort, hour after hour.
TIGER EYE ADVANCED MONITORING SYSTEM - KEEP A REAL-TIME "EYE" ON IMPORTANT SYSTEM FUNCTIONS: Depending on the mower model and engine selection, the Tiger Eye™ Advanced Monitoring System monitors a wide variety of systems in real-time, giving you valuable information in just a glance, right from the operator’s seat.
12-VOLT OUTLET - KEEP YOUR DEVICE CHARGED AND READY: 12-volt outlet for added convenience allows operators to plug in small accessories or keep their phones at full charge.

Features

THE ENVY OF THE NEIGHBORHOOD - 72" CUTTING WIDTH: The envy of the industry, Velocity Plus™ decks deliver an amazing quality-of-cut and a wide, even discharge. This deck is equipped with Scag’s ultra-tough cast-iron spindles featuring tapered roller bearings and a top-mounted grease fitting with a relief valve to prevent over-greasing.
OGURA PTO CLUTCH BRAKE - STRONG, ADJUSTABLE CLUTCH FOR LONG LIFE: The Ogura GT5 PTO Clutch Brake provides excellent starting and stopping power for the cutter deck, 350 ft. lb. of holding strength, and an adjustable air gap for long life.
HEAVY-DUTY, DOUBLE-TUBE STEEL MAIN FRAME - SOLID DESIGN FOR YEARS OF DEPENDABLE SERVICE: The Cheetah™ is ultra-strong and built for long life. It has a wide mower stance and extra-low center of gravity for ultimate stability and a replaceable front caster-wheel weldment.
HYDRO-GEAR ZT-5400 TRANSAXLES - SPEEDS UP TO 16 MPH!: Two-speed ZT-5400 transaxle lets you choose either Low Range to travel up to 12 mph or High Range for up to 16 mph. Internal 16 cc pumps and 21 cc motors help provide speed, power and torque. The transaxle’s design greatly reduces hoses and possible leak points.
EASE OF MAINTENANCE - MORE UPTIME: Flip-up components, easy-to-reach grease Zerks and many more features make servicing the Cheetah™ simple, so you can be in the shop less and on the job more.
CHEETAH II OPERATOR SUSPENSION SYSTEM - UNPARALLELED COMFORT: With five settings from soft to firm, the Operator Suspension System isolates the operator from the effects of rough terrain, providing unmatched comfort without sacrificing quality-of-cut. A coil-over shock provides effective suspension action right where it’s needed, and only where it’s needed. The seat’s 4-point, rubber iso-mounting provides even more shock absorption, maximizing your comfort, hour after hour.
TIGER EYE ADVANCED MONITORING SYSTEM - KEEP A REAL-TIME "EYE" ON IMPORTANT SYSTEM FUNCTIONS: Depending on the mower model and engine selection, the Tiger Eye™ Advanced Monitoring System monitors a wide variety of systems in real-time, giving you valuable information in just a glance, right from the operator’s seat.
12-VOLT OUTLET - KEEP YOUR DEVICE CHARGED AND READY: 12-volt outlet for added convenience allows operators to plug in small accessories or keep their phones at full charge.

Compare Models

2024 SCAG Power Equipment Cheetah II 72 in. Kawasaki FX Series EFI 38 hp

2024 SCAG Power Equipment Cheetah II 72 in. Kawasaki FX Series EFI 38 hp

General Information

Body

Drivetrain

Engine

Hydraulics

Measurements

Operational

Other

Features

Features